Monday - Sunday, 8AM to 12PM
Call us now 055-2597-257
Washing machine repair al Ghadeer village

Washing Machine Repair Al Ghadeer Village

Business Hours

Monday – Sunday, 8 AM to 12 PM

 

Prices Start from 150 AED

Diagnosis Time: 40 – 50 Minutes

Repair Time: 1-2 Days (depending on the brand and type of repair required)
Site Visit Charge: 50 AED

Noise IssuesAED 149 – 499
Not drainingAED 149 – 599
Not starting or trippingAED 149 – 499
Water Inlet MalfunctionAED 149 – 799
LeakingAED 149 – 849
Door MalfunctionAED 149 – 749


When your washing machine breaks down, it may be a real hassle, but luckily Sama Technical Services has qualified technicians who can handle various machines. Our technicians are also friendly and professional for washing machine repair Al Ghadeer Village. They try to fix problems on-site whenever possible. They can tell you what parts you need to replace if any.

For front loader washers, you may find the lid switch strike to be malfunctioning. The lid switch strike is located on the door frame and communicates with the machine when it’s closed. The team at Sama Technical Services are highly trained and experienced in this field, and they can quickly fix the problem. We also offer after-care services for their customers. Our services are available around the clock and are convenient for anyone in the region.

When you book an appointment with a Sama Technical Services washing machine repair Al Ghadeer Village, you’ll be able to feel confident about the quality of their work and the cost of the service. You’ll get an estimated quote in advance so that you can budget accordingly. Moreover, you won’t have to worry about checking references and chasing technicians. You’ll get quick and efficient service from our reliable home appliances repair company, without the hassle of checking references and checking prices.

Common Issues with washing machines

Here’s a quick run-down of some common issues with washing machines. If the rinsing light comes on during a cycle, it is probably nothing to worry about. This is normal and is the indicator that the rinsing cycle is in progress. If, however, this light stays on throughout the cycle, something may be wrong. Some possible causes are an electrical malfunction or a damaged timer. So, what should you do?

Problems with the main tub seal

If you’re experiencing problems with the main tub seal in your washing machine, you may need to replace it. There are a few ways to do this. First, you need to determine the problem. Depending on your washing machine model, the problem can be caused by one of several things. For instance, the seal may not be fully seating. If this is the case, placing some weight on the seal may help it seat properly.

Overfilling is a defective water-inlet valve or water-level switch

Another cause of overfilling is a defective water-inlet valve or water-level switch. The broken water-inlet valve can allow water to leak into the washing machine. Meanwhile, a faulty water-level switch cannot properly detect the correct water level in the washer tub and does not signal when the water is finished. This can result in a wash cycle that is unusable. A broken water-level switch could also cause the washing machine to vibrate or not fill properly.

Problems with the drain pump

If the drain pump in your washing machine fails to function, you need to check the belt. The belt is not too thick and should be easy to stretch with your fingers. The pump flywheel should also be free from obstructions. Broken impellers or damaged seals are also possible causes of pump failure. To test the pump’s functionality, unbolt the access panel and check the main and pump belts. If you suspect a belt problem, consult the manufacturer’s diagram.

Problems with the lid switch

If you’ve noticed that your washing machine isn’t finishing loads, it might be the lid switch. While it doesn’t have to be that complicated to fix, lid switches can become faulty over time and stop working properly. These problems can lead to your washer not finishing the load at all.

Problems with the control valve

If the control valve of your washing machine has stopped working, one of the first things you should do is to check whether the solenoid is stuck closed or not. If this is the case, you should have the machine checked by a qualified technician. As water valves are not designed to be disassembled in the field, you should not attempt to fix them yourself. Instead, call a local appliance repair shop such as Sama Technical Services for assistance.

To fix the control valve of a washing machine, you need to understand what it is. It has two threaded ports that connect to the hot and cold water hoses on the back of the washing machine. It works as a gatekeeper by allowing water into the machine tub when it receives electrical signals from the washer. It also has two ports for hot and cold water supply hoses, which you can unplug.

Experienced company of washing machine repair in Al Ghadeer Village

With our expert technicians, you can have your washing machine repaired quickly and easily. And you won’t have to worry about the cost or hassle – we provide free estimates and technical support, too. If you have any questions regarding your washing machine, you can contact us right away. Our experts specialize in repairing all kinds of washing machines and can repair almost any make or model.



Leave a comment

Your email address will not be published.

Request a Quote

24/7 Repair Services, We’re Here When You Need Us

    Contact

    Our Address

    International City, Dubai

      home appliances repair abu dhabi